Mg-MOF-74 Derived Defective Framework for Hydrogen Storage at Above-Ambient Temperature Assisted by Pt Catalyst.

Metal-organic frameworks (MOFs) are promising candidates for room-temperature hydrogen storage materials after modification, thanks to their ability to chemisorb hydrogen. However, the hydrogen adsorption strength of these modified MOFs remains insufficient to meet the capacity and safety requirements of hydrogen storage systems. To address this challenge, a highly defective framework material known as de-MgMOF is prepared by gently annealing Mg-MOF-74. This material retains some of the crystal properties of the original Mg-MOF-74 and exhibits exceptional hydrogen storage capacity at above-ambient temperatures. The MgO5 knots around linker vacancies in de-MgMOF can adsorb a significant amount of dissociated and nondissociated hydrogen, with adsorption enthalpies ranging from -22.7 to -43.6 kJ mol-1 , indicating a strong chemisorption interaction. By leveraging a spillover catalyst of Pt, the material achieves a reversible hydrogen storage capacity of 2.55 wt.% at 160 °C and 81 bar. Additionally, this material offers rapid hydrogen uptake/release, stable cycling, and convenient storage capabilities. A comprehensive techno-economic analysis demonstrates that this material outperforms many other hydrogen storage materials at the system level for on-board applications.

Revealing Distance-Dependent Synergy between MnCo2O4 and Co-N-C in Boosting the Oxygen Reduction Reaction.

Synergistic effects have been applied to a variety of hybrid electrocatalysts to improve their activity and selectivity. Understanding the synergistic mechanism is crucial for the rational design of these types of catalysts. Here, we synthesize a MnCo2O4/Co-N-C hybrid electrocatalyst for the oxygen reduction reaction (ORR) and systematically investigate the synergy between MnCo2O4 nanoparticles and Co-N-C support. Theoretical simulations reveal that the synergy is closely related to the distance between active sites. For a pair of remote active sites, the ORR proceeds through the known 2e- + 2e- relay catalysis while the direct 4e- ORR occurs on a pair of adjacent active sites. Therefore, the formation of the undesired byproduct (H2O2) is inhibited at the interface region between MnCo2O4 and Co-N-C. This synergistic effect is further verified on an anion-exchange membrane fuel cell. The findings deepen the understanding of synergistic catalysis and will provide guidance for the rational design of hybrid electrocatalysts.

Single-crystal ZrCo nanoparticle for advanced hydrogen and H-isotope storage.

Hydrogen-isotope storage materials are essential for the controlled nuclear fusion. However, the currently used smelting-ZrCo alloy suffers from rapid degradation of performance due to severe disproportionation. Here, we reveal a defect-derived disproportionation mechanism and report a nano-single-crystal strategy to solve ZrCo's problems. Single-crystal nano-ZrCo is synthesized by a wet-chemistry method and exhibits excellent comprehensive hydrogen-isotope storage performances, including ultrafast uptake/release kinetics, high anti-disproportionation ability, and stable cycling, far superior to conventional smelting-ZrCo. Especially, a further incorporation of Ti into nano-ZrCo can almost suppress the disproportionation reaction. Moreover, a mathematical relationship between dehydrogenation temperature and ZrCo particle size is established. Additionally, a microwave method capable of nondestructively detecting the hydrogen storage state of ZrCo is developed. The proposed disproportionation mechanism and anti-disproportionation strategy will be instructive for other materials with similar problems.

Inductive Effect on Single-Atom Sites.

Single-atom catalysts exhibit promising electrocatalytic activity, a trait that can be further enhanced through the introduction of heteroatom doping within the carbon skeleton. Nonetheless, the intricate relationship between the doping positions and activity remains incompletely elucidated. This contribution sheds light on an inductive effect of single-atom sites, showcasing that the activity of the oxygen reduction reaction (ORR) can be augmented by reducing the spatial gap between the doped heteroatom and the single-atom sites. Drawing inspiration from this inductive effect, we propose a synthesis strategy involving ligand modification aimed at precisely adjusting the distance between dopants and single-atom sites. This precise synthesis leads to optimized electrocatalytic activity for the ORR. The resultant electrocatalyst, characterized by Fe-N3P1 single-atom sites, demonstrates remarkable ORR activity, thus exhibiting great potential in zinc-air batteries and fuel cells.

Molecular Recognition Regulates Coordination Structure of Single-Atom Sites.

Coordination engineering for single-atom sites has drawn increasing attention, yet its chemical synthesis remains a tough issue, especially for tailorable coordination structures. Herein, a molecular recognition strategy is proposed to fabricate single-atom sites with regulable local coordination structures. Specifically, a heteroatom-containing ligand serves as the guest molecule to induce coordination interaction with the metal-containing host, precisely settling the heteroatoms into the local structure of single-atom sites. As a proof of concept, thiophene is selected as the guest molecule, and sulfur atoms are successfully introduced into the local coordination structure of iron single-atom sites. Ultrahigh oxygen reduction electrocatalytic activity is achieved with a half-wave potential of 0.93 V versus reversible hydrogen electrode. Furthermore, the strategy possesses excellent universality towards diversified types of single-atom sites. This work makes breakthroughs in the fabrication of single-atom sites and affords new opportunities in structural regulation at the atomic level.

Construction of Co4 Atomic Clusters to Enable Fe-N4 Motifs with Highly Active and Durable Oxygen Reduction Performance.

Fe-N-C catalysts with single-atom Fe-N4 configurations are highly needed owing to the high activity for oxygen reduction reaction (ORR). However, the limited intrinsic activity and dissatisfactory durability have significantly restrained the practical application of proton-exchange membrane fuel cells (PEMFCs). Here, we demonstrate that constructing adjacent metal atomic clusters (ACs) is effective in boosting the ORR performance and stability of Fe-N4 catalysts. The integration of Fe-N4 configurations with highly uniform Co4 ACs on the N-doped carbon substrate (Co4 @/Fe1 @NC) is realized through a "pre-constrained" strategy using Co4 molecular clusters and Fe(acac)3 implanted carbon precursors. The as-developed Co4 @/Fe1 @NC catalyst exhibits excellent ORR activity with a half-wave potential (E1/2 ) of 0.835 V vs. RHE in acidic media and a high peak power density of 840 mW cm-2 in a H2 -O2 fuel cell test. First-principles calculations further clarify the ORR catalytic mechanism on the identified Fe-N4 that modified with Co4 ACs. This work provides a viable strategy for precisely establishing atomically dispersed polymetallic centers catalysts for efficient energy-related catalysis.

Honeycomb ZrCo Intermetallic for High Performance Hydrogen and Hydrogen Isotope Storage.

Hydrogen isotope storage materials are of great significance for controlled nuclear fusion, which is promising to provide unlimited clean and dense energy. Conventional storage materials of micrometer-sized polycrystalline ZrCo alloys prepared by the smelting method suffer from slow kinetics, pulverization, disproportionation, and poor cycling stability. Here, we synthesize a honeycomb-structured ZrCo composed of highly crystalline submicrometer ZrCo units using electrospray deposition and magnesiothermic reduction. Compared with conventional ones, honeycomb ZrCo does not require activation and exhibits more than 1 order of magnitude increase in kinetic property. Owing to low defects and low stress, the anti-disproportionation ability and cycling stability of honeycomb ZrCo are also obviously higher than those of conventional ZrCo. Moreover, the interfacial stress (due to hydrogenation/dehydrogenation) as a function of particle radius is established, quantitatively elucidating that small-sized ZrCo reduces stress and pulverization. This study points out a direction for the structural design of ZrCo alloy with high-performance hydrogen isotope storage.

Ultrathin Nanotube Structure for Mass-Efficient and Durable Oxygen Reduction Reaction Catalysts in PEM Fuel Cells.

It remains a challenge for platinum-based oxygen reduction reaction catalysts to simultaneously possess high mass activity and high durability in proton-exchange-membrane fuel cells. Herein, we report ultrathin holey nanotube (UHT)-structured Pt-M (M = Ni, Co) alloy catalysts that achieve unprecedented comprehensive performance. The nanotubes have ultrathin walls of 2-3 nm and construct self-supporting network-like catalyst layers with thicknesses of less than 1 µm, which have efficient mass transfer and 100% surface exposure, thus enabling high utilization of Pt atoms. Combined with the high intrinsic activity produced by the alloying effect, the catalysts achieve high mass activity. Moreover, the nanotube structure not only avoids the agglomeration problem of nanoparticles, but the low curvature of the tube wall also gives UHT a low surface energy (less than 1/3 of that of the same size nanoparticle), so UHT is more resistant to the Ostwald ripening and is stable. For the first time, the U.S. DOE mass activity target and dual durability targets for load and start-stop cycles are achieved on one catalyst. This study provides an effective structural strategy for the preparation of electrocatalysts with high atomic efficiency and excellent durability.

MXene-Reinforced Liquid Metal/Polymer Fibers via Interface Engineering for Wearable Multifunctional Textiles.

Stretchable conductive fibers are an important component of wearable electronic textiles, but often suffer from a decrease in conductivity upon stretching. The use of liquid metal (LM) droplets as conductive fillers in elastic fibers is a promising solution. However, there is an urgent need to develop effective strategies to achieve high adhesion of LM droplets to substrates and establish efficient electron transport paths between droplets. Here, we use large-sized MXene two-dimensional conductive materials to modify magnetic LM droplets and prepare MXene/magnetic LM/poly(styrene-butadiene-styrene) composite fibers (MLMS fibers). The MXene sheets decorated on the surface of magnetic LM droplets not only enhance the droplet adhesion to substrate but also bridge adjacent droplets to establish efficient conductive paths. MLMS fibers show several-fold improvements in tensile strength and elongation and a 30-fold increase in conductivity compared with pure LM-filled fibers. These conductive fibers can be easily woven into multifunctional textiles, which exhibit strong electromagnetic interference shielding and stable Joule heating performances even under large tensile deformation. In addition, other advantages of MLMS textiles, such as high gas/liquid permeability, strong chemical resistance (acid and alkaline conditions), high/low-temperature tolerance (-40-150 °C) and water washability, make them particularly suitable for wearable applications.

Activating the Electrocatalysis of MoS2 Basal Plane for Hydrogen Evolution via Atomic Defect Configurations.

Point defects of heteroatoms and vacancies can activate the inert basal plane of molybdenum sulfide (MoS2 ) to improve its performance on catalyzing the hydrogen evolution reaction (HER). However, the synergy between heteroatoms and vacancies is still unclear. Here, a chemical vapor deposition-assisted in situ vanadium (V) doping method is used to synthesize monolayer MoS2 with abundant and tunable vacancies and V-dopants in the lattice. Ten delicate defect configurations are prepared to provide a complex system for the relationship investigation between microstructure and catalytic performance. The combination of on-chip electrochemical tests and theoretical calculations indicates that the HER performance greatly depends on the type and amount of defect configurations. The optimal configuration is that three V atoms are aggregated and accompanied by abundant sulfur vacancies, in which, H atoms directly interact with Mo and V atoms to form the most stable metal-bridge structure. The on-chip measurements also confirm that the sample with high concentrations of this type of defect configuration exhibits the best catalytic performance, indicating the efficient synergy in the optimal configuration. The revealed effects of defect configurations are expected to inspire the design and regulation of high-efficiency 2D catalysts.

Iron atom-cluster interactions increase activity and improve durability in Fe-N-C fuel cells.

Simultaneously increasing the activity and stability of the single-atom active sites of M-N-C catalysts is critical but remains a great challenge. Here, we report an Fe-N-C catalyst with nitrogen-coordinated iron clusters and closely surrounding Fe-N4 active sites for oxygen reduction reaction in acidic fuel cells. A strong electronic interaction is built between iron clusters and satellite Fe-N4 due to unblocked electron transfer pathways and very short interacting distances. The iron clusters optimize the adsorption strength of oxygen reduction intermediates on Fe-N4 and also shorten the bond amplitude of Fe-N4 with incoherent vibrations. As a result, both the activity and stability of Fe-N4 sites are increased by about 60% in terms of turnover frequency and demetalation resistance. This work shows the great potential of strong electronic interactions between multiphase metal species for improvements of single-atom catalysts.

Environmentally Tough and Stretchable MXene Organohydrogel with Exceptionally Enhanced Electromagnetic Interference Shielding Performances.

Conductive hydrogels have potential applications in shielding electromagnetic (EM) radiation interference in deformable and wearable electronic devices, but usually suffer from poor environmental stability and stretching-induced shielding performance degradation. Although organohydrogels can improve the environmental stability of materials, their development is at the expense of reducing electrical conductivity and thus weakening EM interference shielding ability. Here, a MXene organohydrogel is prepared which is composed of MXene network for electron conduction, binary solvent channels for ion conduction, and abundant solvent-polymer-MXene interfaces for EM wave scattering. This organohydrogel possesses excellent anti-drying ability, low-temperature tolerance, stretchability, shape adaptability, adhesion and rapid self-healing ability. Two effective strategies have been proposed to solve the problems of current organohydrogel shielding materials. By reasonably controlling the MXene content and the glycerol-water ratio in the gel, MXene organohydrogel can exhibit exceptionally enhanced EM interference shielding performances compared to MXene hydrogel due to the increased physical cross-linking density of the gel. Moreover, MXene organohydrogel shows attractive stretching-enhanced interference effectiveness, caused by the connection and parallel arrangement of MXene nanosheets. This well-designed MXene organohydrogel has potential applications in shielding EM interference in deformable and wearable electronic devices.

Sulfur-anchoring synthesis of platinum intermetallic nanoparticle catalysts for fuel cells.

Atomically ordered intermetallic nanoparticles are promising for catalytic applications but are difficult to produce because the high-temperature annealing required for atom ordering inevitably accelerates metal sintering that leads to larger crystallites. We prepared platinum intermetallics with an average particle size of <5 nanometers on porous sulfur-doped carbon supports, on which the strong interaction between platinum and sulfur suppresses metal sintering up to 1000°C. We synthesized intermetallic libraries of small nanoparticles consisting of 46 combinations of platinum with 16 other metal elements and used them to study the dependence of electrocatalytic oxygen-reduction reaction activity on alloy composition and platinum skin strain. The intermetallic libraries are highly mass efficient in proton-exchange-membrane fuel cells and could achieve high activities of 1.3 to 1.8 amperes per milligram of platinum at 0.9 volts.

Hydrogen Passivation of M-N-C (M = Fe, Co) Catalysts for Storage Stability and ORR Activity Improvements.

M-N-C (M = Fe, Co) are highly active nonprecious metal electrocatalysts for the oxygen reduction reaction (ORR) and other applications. Although their operation stability has been extensively studied in proton-exchange-membrane fuel cells, the storage stability that determines the performance maintenance before use has not yet been understood. Here, it is found that long-term exposure of M-N-C catalysts in air would cause surface oxidation and hydroxylation, resulting in significant decrease of ORR activity and fuel-cell performances. Hydrogen passivation is demonstrated to be an effective strategy to protect the atomic M-N4 active sites and improve the storage stability of the catalysts. In addition, the hydrogen-termination can also reduce the ORR energy barrier and increase the utilization of active sites, leading to the improvements of fuel-cell activity and power density. Notably, these findings help to understand the storage-associated degradation and protection of M-N-C catalysts.

Highly Accessible Atomically Dispersed Fe-N x Sites Electrocatalyst for Proton-Exchange Membrane Fuel Cell.

Atomically dispersed transition metal-N x sites have emerged as a frontier for electrocatalysis because of the maximized atom utilization. However, there is still the problem that the reactant is difficult to reach active sites inside the catalytic layer in the practical proton exchange membrane fuel cell (PEMFC) testing, resulting in the ineffective utilization of the deeply hided active sites. In the device manner, the favorite structure of electrocatalysts for good mass transfer is vital for PEMFC. Herein, a facile one-step approach to synthesize atomically dispersed Fe-N x species on hierarchically porous carbon nanostructures as a high-efficient and stable atomically dispersed catalyst for oxygen reduction in acidic media is reported, which is achieved by a predesigned hierarchical covalent organic polymer (COP) with iron anchored. COP materials with well-defined building blocks can stabilize the dopants and provide efficient mass transport. The appropriate hierarchical pore structure is proved to facilitate the mass transport of reactants to the active sites, ensuring the utilization of active sites in devices. Particularly, the structurally optimized HSAC/Fe-3 displays a maximum power density of up to 824 mW cm-2, higher than other samples with fewer mesopores. Accordingly, this work will offer inspirations for designing efficient atomically dispersed electrocatalyst in PEMFC device.

Hydrogen storage in incompletely etched multilayer Ti2CTx at room temperature.

Hydrogen storage materials are the key to hydrogen energy utilization. However, current materials can hardly meet the storage capacity and/or operability requirements of practical applications. Here we report an advancement in hydrogen storage performance and related mechanism based on a hydrofluoric acid incompletely etched MXene, namely, a multilayered Ti2CTx (T is a functional group) stack that shows an unprecedented hydrogen uptake of 8.8 wt% at room temperature and 60 bar H2. Even under completely ambient conditions (25 °C, 1 bar air), Ti2CTx is still able to retain ~4 wt% hydrogen. The hydrogen storage is stable and reversible in the material, and the hydrogen release is controllable by pressure and temperature below 95 °C. The storage mechanism is deduced to be a nanopump-effect-assisted weak chemisorption in the sub-nanoscale interlayer space of the material. Such a storage approach provides a promising strategy for designing practical hydrogen storage materials.

Carbon Fibers Embedded with Aligned Magnetic Particles for Efficient Electromagnetic Energy Absorption and Conversion.

Harvesting electromagnetic (EM) energy from the environment and converting it into useful micropower is a new and ideal way to eliminate EM radiation and while providing power for microelectronic devices. The key material of this technology is broadband, ultralight, and ultrathin EM-wave-absorbing materials, whose preparation remains challenging. Herein, a high magnetic field (HMF) strategy is proposed to prepare a biomass-derived CoFe/carbon fiber (CoFe/CF) composite, in which CoFe magnetic particles are aligned in CFs, creating magnetic coupling and fast electron transmission channels. The graphitization degree of CFs is improved via the "migration catalysis" of CoFe particles under HMF. The HMF-derived CoFe/CF shows a largely broadened EM wave absorption bandwidth under ultralight and ultrathin conditions (1.5 mm). Its absorption bandwidth increases 5-10 times compared with conventional CoFe/CF that has randomly distributed CoFe particles and surpasses the reported analogues. A device model for EM energy absorption and reuse is designed based on the HMF-derived CoFe/CF membrane, which exhibits a 300% higher capability than conventional CoFe/CF membrane in converting EM energy to thermal energy. This work offers a new strategy for the design and fabrication of broadband, ultrathin, and ultralight EM wave absorption materials and demonstrates a potential conversion approach of the waste EM energy.

Maximizing ion accessibility in MXene-knotted carbon nanotube composite electrodes for high-rate electrochemical energy storage.

Improving the accessibility of ions in the electrodes of electrochemical energy storage devices is vital for charge storage and rate performance. In particular, the kinetics of ion transport in organic electrolytes is slow, especially at low operating temperatures. Herein, we report a new type of MXene-carbon nanotube (CNT) composite electrode that maximizes ion accessibility resulting in exceptional rate performance at low temperatures. The improved ion transport at low temperatures is made possible by breaking the conventional horizontal alignment of the two-dimensional layers of the MXene Ti3C2 by using specially designed knotted CNTs. The large, knot-like structures in the knotted CNTs prevent the usual restacking of the Ti3C2 flakes and create fast ion transport pathways. The MXene-knotted CNT composite electrodes achieve high capacitance (up to 130 F g-1 (276 F cm-3)) in organic electrolytes with high capacitance retention over a wide scan rate range of 10 mV s-1 to 10 V s-1. This study is also the first report utilizing MXene-based supercapacitors at low temperatures (down to -60 °C).

Nanocasting SiO2 into metal-organic frameworks imparts dual protection to high-loading Fe single-atom electrocatalysts.

Single-atom catalysts (SACs) have sparked broad interest recently while the low metal loading poses a big challenge for further applications. Herein, a dual protection strategy has been developed to give high-content SACs by nanocasting SiO2 into porphyrinic metal-organic frameworks (MOFs). The pyrolysis of SiO2@MOF composite affords single-atom Fe implanted N-doped porous carbon (FeSA-N-C) with high Fe loading (3.46 wt%). The spatial isolation of Fe atoms centered in porphyrin linkers of MOF sets the first protective barrier to inhibit the Fe agglomeration during pyrolysis. The SiO2 in MOF provides additional protection by creating thermally stable FeN4/SiO2 interfaces. Thanks to the high-density FeSA sites, FeSA-N-C demonstrates excellent oxygen reduction performance in both alkaline and acidic medias. Meanwhile, FeSA-N-C also exhibits encouraging performance in proton exchange membrane fuel cell, demonstrating great potential for practical application. More far-reaching, this work grants a general synthetic methodology toward high-content SACs (such as FeSA, CoSA, NiSA).

Rare Earth Single-Atom Catalysts for Nitrogen and Carbon Dioxide Reduction.

Single-atom catalysts (SACs) have attracted much attention owning to their high catalytic properties. Herein, yttrium and scandium rare earth SACs are successfully synthesized on a carbon support (Y1/NC and Sc1/NC). Different from the well-known M-N4 structure of M-N-C (M = Fe, Co) catalysts, Sc and Y atoms with a large atomic radius tend to be anchored to the large-sized carbon defects through six coordination bonds of nitrogen and carbon. Although Y- and Sc-based nanomaterials are generally inactive to room-temperature electrochemical reactions, Y1/NC and Sc1/NC SACs exhibit catalytic activities to nitrogen reduction reaction and carbon dioxide reduction reaction due to the modulation of the local electronic structure of Y/Sc single atoms by N and C coordination. The catalytic functions of rare earth single atoms not only demonstrate the magical effect of SACs but also promote the application of rare earth catalysts in room-temperature electrochemical reactions.